Bricklaying Contractors glossary
The terms you'll come across, explained in plain English.
- Coping
- The top layer of a free-standing wall, made from brick, stone or concrete, designed to stop rain soaking down into the brickwork.
- Course
- A single horizontal row of bricks in a wall. Bricklayers measure height in courses, with standard brickwork rising around 75mm per course including the mortar joint.
- Crack stitching
- A repair where stainless steel helical bars are grouted into mortar joints across a crack, tying the brickwork back together.
- Damp-proof course
- A horizontal layer of impermeable material, such as membrane or engineering bricks, laid just above ground level to stop moisture rising up a wall.
- Engineering brick
- A dense, strong, low-absorption brick used below ground, for damp-proof courses, copings and areas exposed to heavy wear or water.
- English bond
- A strong traditional pattern with alternate courses of bricks laid lengthways and end-on. It is often used in garden walls, retaining walls and older buildings.
- Facing brick
- A brick made to look good on the visible face of a wall, available in many colours and textures, with different ratings for frost resistance.
- Flaunching
- The sloped mortar bed on top of a chimney stack that holds the pots in place and sheds rainwater away from the flues.
- Flemish bond
- A traditional pattern alternating long faces and short ends of bricks in each course. Common on older solid-walled houses, it creates a decorative, strong wall.
- Lime mortar
- Mortar made with lime instead of cement. It is softer and more breathable and is the right choice for most pre-1919 buildings and soft bricks.
- Lintel
- A beam over a door or window opening that carries the brickwork above. Failed lintels cause cracks from the corners of openings.
- Pier
- A thicker brick column built into a wall at intervals to stiffen it, commonly used on half-brick garden walls and at gate openings.
- Repointing
- Raking out old, eroded mortar from brickwork joints and refilling them with fresh mortar to keep water out and protect the bricks.
- Stretcher bond
- The most common modern brick pattern, with each brick laid lengthways and the joints staggered by half a brick in each course. It is used for cavity walls and half-brick walls.
- Wall tie
- A metal tie linking the inner and outer leaves of a cavity wall. Older ties can corrode and expand, cracking the brickwork.
Get a free bricklaying contractors quote
Tell us what you need and we'll come back with a clear price.
Request a quote