Bricklaying Contractors
Repointing
Raking out failed mortar joints and refilling with a matching mortar to keep water out and restore the look of brickwork.

What's involved
Mortar joints wear away over decades, letting rain into walls and causing damp, frost damage and loose bricks. Repointing involves raking out old mortar to a depth of around 15 to 20 millimetres, usually with hand tools or a carefully used grinder, then brushing and dampening the joints before packing in new mortar. The finish, such as flush, bucket handle, weatherstruck or recessed, should match the original. The mortar matters as much as the method. Older homes built with soft bricks and lime mortar must be repointed in lime, because hard cement mortar traps moisture and causes bricks to crumble. Modern brickwork usually suits a cement-based mix. Repointing the front elevation of a terraced house typically takes three to six days, plus scaffolding. Avoid repointing in frost or very hot weather.
How we handle it
Describe the job
Use the quote form to explain what you want built or repaired, rough sizes, and any drawings or planning approvals. Photos of existing brickwork help with matching.
Site visit
A local bricklaying contractor looks at the ground, access, existing walls and brick type, discusses mortar, bond and finish, and checks whether building control or neighbours need involving.
Fixed quote
You receive a written quote covering foundations, materials, labour, scaffolding and waste removal, with one all-in price and an expected timeline.
Construction
The contractor sets out, digs foundations if needed, builds the brickwork to line and level, installs damp-proof courses, ties and lintels, and keeps the site tidy.
Finish and handover
Joints are finished to match, brickwork is cleaned down, waste is removed, and any building control inspections are completed and signed off.
Price guide
Bricklaying is priced on the amount of brickwork, the type of bricks, foundations and access. Repointing and repairs are usually priced per square metre or per job, and new walls by length and height. Reclaimed or special bricks, lime mortar and scaffolding add cost. After a site visit, your contractor gives one all-in fixed price.
- Crack stitching: £80–£150 per metre. Helical bars set into raked joints with grout, then repointed to match.
- Repointing: £40–£80 per m². Raking out and repointing; lime mortar and scaffolding increase the price.
- Garden wall, one metre high: £180–£350 per metre. Foundation, frost-resistant bricks, damp-proof course and coping included.
Questions about repointing
How long does repointing last?
Good repointing can last 30 years or more, depending on exposure, mortar type and workmanship. Lime pointing on older buildings is designed to wear sacrificially, protecting the bricks. Exposed walls, chimneys and garden walls usually need repointing more often than sheltered elevations.
Other services
Garden and Boundary Walls
New brick garden walls, boundary walls, retaining walls and piers, built on proper foundations with copings to shed water.
Extension Brickwork
Cavity wall construction for single and two-storey extensions, from foundations to roof plate, to approved plans and Building Regulations.
Brickwork Repairs
Replacing spalled and cracked bricks, rebuilding bulging sections, crack stitching and repairing damaged walls to match.
Chimney Rebuilds and Repairs
Rebuilding and repointing chimney stacks, replacing pots and flaunching, and removing redundant stacks safely.
Brick Steps, Piers and Features
Brick steps, gate piers, planters, barbecues and other garden features built in matching or contrasting brick.
Repointing near you
Get a free bricklaying contractors quote
Tell us what you need and we'll come back with a clear price.
Request a quote