Bricklaying Contractors

Bricklaying Contractors

Chimney Rebuilds and Repairs

Rebuilding and repointing chimney stacks, replacing pots and flaunching, and removing redundant stacks safely.

Free Bricklaying Contractors quote

No obligation. We only use your details to reply about this job.

Chimney Rebuilds and Repairs — Bricklaying Contractors

What's involved

Chimney stacks take the full force of wind and rain, and many are in poor condition, with crumbling mortar, loose pots and cracked flaunching. Contractors erect scaffolding or use access equipment, then repoint, partially rebuild or fully rebuild the stack to match the original brick and detailing. New flaunching, the mortar bed around the pots, is laid to shed water, and pots are reset or replaced, with cowls or caps fitted to unused flues while leaving ventilation. Lead flashings where the stack meets the roof are often renewed at the same time, which may involve a roofer. Taking down a redundant stack needs care, as the chimney breast below must still be properly supported, and party stacks shared with neighbours need agreement. A chimney rebuild usually takes two to five days once scaffolding is up. Check whether your home is listed before altering a stack.

How we handle it

  1. Describe the job

    Use the quote form to explain what you want built or repaired, rough sizes, and any drawings or planning approvals. Photos of existing brickwork help with matching.

  2. Site visit

    A local bricklaying contractor looks at the ground, access, existing walls and brick type, discusses mortar, bond and finish, and checks whether building control or neighbours need involving.

  3. Fixed quote

    You receive a written quote covering foundations, materials, labour, scaffolding and waste removal, with one all-in price and an expected timeline.

  4. Construction

    The contractor sets out, digs foundations if needed, builds the brickwork to line and level, installs damp-proof courses, ties and lintels, and keeps the site tidy.

  5. Finish and handover

    Joints are finished to match, brickwork is cleaned down, waste is removed, and any building control inspections are completed and signed off.

Price guide

Bricklaying is priced on the amount of brickwork, the type of bricks, foundations and access. Repointing and repairs are usually priced per square metre or per job, and new walls by length and height. Reclaimed or special bricks, lime mortar and scaffolding add cost. After a site visit, your contractor gives one all-in fixed price.

  • Repointing: £40–£80 per m². Raking out and repointing; lime mortar and scaffolding increase the price.
  • Garden wall, one metre high: £180–£350 per metre. Foundation, frost-resistant bricks, damp-proof course and coping included.
  • Bricklayer day rate: £220–£320 per day. Skilled bricklayer for small jobs; labourers and materials are priced separately.

Questions about chimney rebuilds and repairs

What causes cracks in brick walls?

Cracks in brick walls are caused by movement from subsidence, tree roots, leaking drains, thermal expansion, failed lintels or rusting wall ties. Hairline cracks are often cosmetic, but stepped cracks or cracks that widen need investigating. A structural engineer can assess serious or ongoing movement.

Can new bricks be matched to old ones?

Yes, new or reclaimed bricks can usually be matched closely to existing ones, though it takes effort. Contractors compare size, colour, texture and age, using reclaim yards and brick-matching services. Matching the mortar colour and joint style matters just as much for a good result.

Do I need a party wall agreement for brickwork?

In England and Wales, you may need to serve notice under the Party Wall etc. Act 1996 if you build on the boundary line, work on a shared wall or dig foundations near a neighbour's. Neighbours can agree in writing or appoint a surveyor. Notice must be given before work starts.

Get a free bricklaying contractors quote

Tell us what you need and we'll come back with a clear price.

Request a quote